PRL Truck Mounted Drill Rig Model PDTHR-300 Refurbished is primarily designed for water well applications as drinking water or for agricultural use. PRL PDTHR- 300 Refurbished is among the best and most sought after truck mounted drilling rig in the market. It is intended for use in borehole drilling for consumable and agricultural purposes. PRL PDTHR 300 Refurbished is designed for 152 254mm (6 to 10) diameter holes with a down the hole hammer and 152-304mm (6-12) with Rotary operation.
Technical Specification
Prime Mover: Truck |
|
Make | Ashok Leyland |
Drive | 6 x 4 |
Gross Vehicle Weight | 25 MT |
Engine Rating | 169 HP @ 2400 rpm |
Air Compressor |
|
Make | ELGI |
CFM | 1100 |
PSI | 300 (21 Bar) |
Drill Depth |
|
Maximum Depth | 300 Meters (1000 Feet) |
Rod Handling | 4.5 Meter (15 Feet) |
Hole Diameter |
|
DTH | 152-254mm (6 "- 10") |
Rotary | 152 - 304mm (6-12) |
Mast |
|
Max Capacity | 18 tons (39600 lbs) |
Height | 8.5 mtr |
Rod handling capacity | 4.5 mtr (15 ft) |
Main Hoist Assembly |
|
Line Pull ( Bare Drum) | 3000 Kgf |
Max Line Speed | 40 M/Minute |
Wire Dia | 16 mm |
Drive | Hydraulic |
Feed System |
|
Pull Up | 11,500 Kgf |
Pull Down | 6,000 Kgf |
Hoisting Speed | 35 Mtr/Minute |
Auxillary Winch |
|
Bare Drum Pull | 1000 Kgf |
Max Speed | 20 M/Minute |
Hydraulic Circuit |
|
Max Operating Pressure | 220 kg/cm2 |
Hydraulic Tank Capacity | 600 Litres |
Filtration Non - Returnline | 10/25 Microns |
Rotary Head |
|
Torque | 600 Kg-M( Optional: 750 kg-M) |
Rotation Speed | 1 -100 Rpm (Optional 0-85 rpm) |
Centrifugal Pump | Centrifugal Heavy duty CP pump C-1 |
Cylinders |
|
Stabilizing Cylinders 4 Nos | 125 mm(Bore), 610 mm(Stroke) |
Mast Raising Cylinder | 125 mm(Bore), 800 mm(Stroke) |
Feed Cylinder | 125 mm(Bore), 2350 mm(Stroke) |
Breakout Wrench | 80 mm(Bore), 300 mm(Stroke) |
RH Slide Out Cylinder | 80 mm(Bore), 450 mm(Stroke) |
PRIME HITECH ENGINEERING LIMITED
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |